Hioki PQ3100 Power Quality Analyzer Price in Bangladesh

Hioki PQ3100 is built for advanced electrical diagnostics and reliable energy analysis, making Hioki PQ3100 Power Quality Analyzer Price in Bangladesh a trusted solution for industrial facilities, commercial applications, and utility maintenance operations. Designed with professional grade performance, this analyzer helps engineers and technicians monitor electrical systems accurately while improving operational efficiency and power reliability.

The analyzer supports comprehensive power quality monitoring for single phase and three phase systems, allowing users to evaluate voltage, current, power factor, harmonics, flicker, and transient events simultaneously. Its advanced recording capability helps capture power abnormalities such as voltage drops, interruptions, and frequency fluctuations for detailed troubleshooting and system analysis. The device also provides accurate long term data logging, making it suitable for preventive maintenance, load studies, and energy audits.

Built with an intuitive interface and intelligent setup guidance, the Hioki PQ3100 simplifies complex measurement procedures for faster and more efficient operation. Its rugged and portable construction allows reliable use in demanding industrial environments, power distribution systems, and engineering applications. The analyzer also supports professional reporting and data management through dedicated software integration, helping users generate clear and organized performance reports.

Hioki PQ3100 Power Quality Analyzers is widely recognized for its measurement accuracy, durable design, and dependable performance in power quality analysis. Industry professionals value its ability to capture detailed electrical data and identify hidden power related issues before they affect system stability. Discussions among engineers also highlight its suitability for on site three phase analysis and electrical load monitoring applications.

Key Features: Hioki PQ3100 Power Quality Analyzer

Record data including voltage, current, power, harmonics, and flicker simultaneously along a single time axis
Measure up to 6000 A AC
Capture all power anomalies, including instantaneous outages, voltage drops, and frequency fluctuations, while simultaneously recording trend data
Quick Set: Easy-to-understand on-screen guide for measurement procedures
Bundled PQ ONE application software makes it easy to create reports
Record waveforms for up to 1 second before and 10 seconds after an anomaly occurs
Accurately measure DC currents over extended periods of time (with an AC/DC auto-zero current sensor)
Directly supply power to connected current sensors
Send measured values to Hioki data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products), Ver. 2.0 and later

Specifications

Specifications: Hioki PQ3100 Power Quality Analyzer

Measurement line type	Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel CH4 for voltage/current, (all channels AC/DC measurement)
Voltage ranges	Voltage measurement: 1000.0 V rms or DC, Transient measurement 2.200 kV peak
Current ranges	50.000 mA AC to 5.0000 kA AC, 10.000 A DC to 2.0000 kA DC (depends on current sensor in use)
Power ranges	50.000 W to 6.0000 MW (determined automatically based on current range in use)
Basic accuracy	Voltage: ±0.2% of nominal voltage, Current: ±0.1 % rdg. ±0.1 % f.s. + current sensor accuracy, Active power: DC ±0.5 % rdg. ±0.5 % f.s. + current sensor accuracy, AC ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
Measurement items	1. Transient over voltage : 200 kHz sampling 2. Frequency cycle : Calculated as one cycle 3. Voltage (1/2) RMS, Current (1/2) RMS: one cycle calculation refreshed every half cycle 4. Voltage swell, Voltage dips, Voltage interruption, RVC (Ver.2.0 or later) : Voltage (1/2) RMS calculation 5. Inrush current : half-cycle calculation: Calculated as the current RMS value for current waveform data sampled every half-cycle. 6. Frequency 200 ms: Calculated as 10 or 12 cycles 7. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period 8. Voltage waveform peak, Current waveform peak 9. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Apparent energy, Reactive energy, Energy cost, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor 10. Voltage crest factor, Current crest factor 11. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0 th to 50 th orders 12. Harmonic voltage-current phase angle: 1 th to 50 th orders 13. Total harmonic distortion factor (voltage/ current) 14. Inter harmonic (voltage/ current): 0.5 th to 49.5 th orders 15. K Factor (multiplication factor) 16. IEC Flicker, Δ V10 Flicker
Record	Maximum recording interval: 1 year, Maximum number of recordable events: 9999 × 365 days
Interfaces	SD/SDHC memory card, RS-232C (for communication/ LR8410 link), LAN (HTTP server/ FTP/ Send e-mail), USB 2.0 (for communication)
Logger connectivity	Sends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 2.0 and later
Display	6.5-inch TFT color LCD (640 × 480 dots)
Power supply	AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A), Battery pack Z1003 (Continuous use: 8 hr, Charging time: Max. 5 hr 30 m with AC adapter)
Dimensions and mass	300 mm (11.81 in)W × 211 mm (8.31 in)H × 68 mm (2.68 in)D, 2.5 kg (88.2 oz) (including battery pack)
Included accessories	Instruction manual ×1, Measurement guide ×1, Voltage cord L1000-05 ×1 set (Red/Yellow/Blue/Gray/Black, Alligator clip ×5, Spiral tube ×5), Color clip (for identifying clamp sensor color) ×1 set, Spiral tube ×5, AC adapter Z1002 ×1, Strap ×1, USB cable (1 m 3.28 ft length) ×1, Battery pack Z1003 ×1, PQ ONE (software, CD) ×1